Moving head projector, with 7 LED of 40W RGBL, controllable by DMX 512 signal with 16 or 20 channels, has Pan and Tilt movement of 16 Bits, adjustable CTO from 5000K to 8000K, auto programs, electronic dimmer from 0 to 100% with 4 different curves (linear, square, inverse square and s-curve). It has preset colours and colour temperature modes with preset programs, programs and speed change of these. With strobe effect up to 25 f/s and pulse strobe effect. Parameter control via 4 push buttons on the front panel and monitor for OLED display. AC power supply 100 – 240W, 50/60 Hz with Powercon input and output connectors. DMX signal input via 3 pin XLR connectors. With a net weight of 6.10 kg and dimensions of 246 x 154 x 370 mm. Including 1 power cable with powercon and schuko connectors of 1.5 m. 1 omega for installation of clamps or clamps.
SPECIFICATIONS
TECHNICAL SPECIFICATIONS
- 7 four-colour 12 W LEDs (RGBL)
- Adjustable beam angle with motorised zoom: 4 to 45
- Pan movement 540, Tilt movement 220
- Luminance
- 9500 lux at 5 m. with all LEDs (RGBL)
- Control signal: DMX512, master-slave and sound activated
- DMX control channels: 16 or 20 DMX channels DMX USITT DMX-512
- Power supply: AC 100 – 240W, 50/60 Hz
- Maximum power consumption: 280W
- Power input: type Powercon 16A
- Power output: Powercon 16A type
- DMX signal input: XLR 3 Pin
- DMX signal output: XLR 3 Pin
- Moving head dimensions: 246 x 154 x 370 mm
- Net weight: 6.1 kg
- Measurements with packaging: 520 x 390 x 270 mm
- Weight with packaging: 10 kg
Features
- Low power consumption
- Smooth and accurate 8/16-bit resolution for PAN/TILT motion
- CTO, linear colour temperature 7.000K – 8,000K, 6,000K – 7,000K, 5,600K – 6,000K, 5,000K- 5.600K
- Integrated colour macros that can be operated via a DMX controller
- Strobing effect up to 25 f/s and pulse strobe effect
- Dimmer
- Electronic dimmer from 0 to 100% with selection of up to 4 different curves (linear, square, inverse square and s-curve)
- Display for OLED parameter control
- Display for OLED parameter control
- Control of channel assignment and other parameters using 4 buttons
- Powercon type connectors for power input and output
3-pin XLR connectors for DMX signal input and output - Overheating protection
- Protection rating: IP20
- Working temperature -20C to + 45C maximum ambient temperature
INCLUDED IN THE PACKAGE
- 1 Q-WASH740Z moving head
- 1 Power cord Powercon / Schuko
- 1 Omega for clamp or claw installation
- 1 User manual
OPTIONAL ACCESSORIES
- Clamps and clamps for fastening and anchoring
- DMX signal cables of different sizes
- DMX signal splitter
